Skip to: main navigation | main content | sitemap | accessibility page

Scroll ▼
Picture of Hergom Sere 100 Glass

Hergom Sere 100 Glass

Hergom Sere 100 Glass and holding frame.

It is essential that a new rope seal is applied when refitting the glass because it maintains the air seal of your appliance. In addition to this, the glass seal also offers a cushion between the glass and the metal door, allowing the glass to expand during use safely.

In preparation for replacing your glass, we recommend spraying the glass retention nuts with a water displacing oil (e.g.WD40); this will help to lubricate the removal of the screw and minimise the risk of damaging the screw. Ideally, you would leave this to soak in overnight. Do not light your fire immediately after applying the oil, wait until you have replaced the glass.

Overtightening of the retention screws can cause the glass to break, either through sheer force or by not allowing enough expansion room. This can be avoided by carefully fitting the glass and only tightening the retention screws a further half turn of the screw after getting them finger tight.

 
 
 
£555.00

H11210-01-01-99-00