Igniter for Oil Stove Long

The long igniter for the Harmony and Stanford oil stoves. 120mm long from flange to End of mesh (body lenght 90mm).

Also used in the Oxford C80 and C100 oil stoves and Hearth stoves A80, A100 and B80, B100.

The swan neck through which it enters the burner pot is held on by 4 nuts and bolts, it is NOT welded onto the pot.

It is powered through a transformer (#37932) situated at the back of the stove.

Please download the Technical document TB72 in the section below for instructions on fitting before purchasing this part to ensure that you do get the correct one for the stove you have.